Safety operating procedures for furnace workers

 There should be a dedicated person checking the furnace materials when loading the furnace. It is strictly forbidden to load explosives, sealed containers, non-ferrous metals and wet materials with water into the furnace to prevent explosion, furnace penetration and abnormal ingredients.Plasma nitriding to enhance component performance To open the furnace cover, open the lock first, then raise the furnace cover and electrodes, check whether there are any obstacles, and then start it again: Do not tilt the furnace when the furnace cover is raised or lowered: There must be a dedicated person to tilt the furnace and a dedicated person to tilt the furnace.Vacuum brazing liquid cooling heat sink plate The slag pit, tapping pit, and slag hopper should be kept dry and there should be no accumulation of water. If there is water, it must be dealt with before proceeding with production operations.Effect of different post-weld insulation on vacuum brazing strength All raw materials entering the furnace are strictly prohibited from being filled with oil, ice, snow, wet mud, etc. During operation, when adding oxidant and alloy materials into the furnace, they are required to be put into the furnace dry and put in in batches to control the heat and prevent fire.Advanced vacuum high pressure gas quenching technology