Ammonia decomposition furnace safety technical operating procedures

 Safety and preventive measures Because both ammonia and hydrogen are dangerous and hazardous, high standards and strict requirements must be imposed on the personnel quality and production environment for decomposing ammonia to produce hydrogen, and safety awareness must be strengthened. Effect of vacuum heat treatment on the properties of powder metallurgy products Therefore, the safety operating procedures are strictly required. Operators must not wear synthetic chemical fiber clothes or nail shoes to enter the production position to prevent accidents. If fire is required during production, it must be submitted to the relevant department for approval, and it can only be carried out after testing meets the process requirements.Optimizing vacuum heat treatment of spring steel 1) No open flames are allowed within 30m around the workshop. 2) Entrants must master certain safety technical knowledge. 3) Operators must undergo three-level safety education, master production skills and safety knowledge, and can enter their positions only after passing the examination.Vacuum Hardening and Vacuum Tempering Heat Treatment for Metal Parts 4) Wear labor protection equipment as required and must be able to use a gas mask. 5) The ammonia decomposition plant must be well ventilated. It is strictly prohibited to pile up flammable, explosive and metal debris indoors. It must be equipped with fire extinguishers, asbestos cloths, spray guns and other fire-fighting equipment. Safety signs must be set up in accordance with relevant national regulations, and inspections and inspections must be organized regularly. Maintenance to ensure fire protection facilities and equipment are intact and effective.Heat treatment process for wide and thick plates