Energy saving and emission reduction in forging workshop

 Adopt hot charging furnace technology. Hot charge charging is an effective measure for heating large forgings. That is, the steel ingots poured from the steel casting workshop are directly transported to the forging workshop for heating without cooling. Generally, the furnace temperature is controlled above 600C. Compared with cold material charging furnace, it can save about 40% energy. Practical Technology For Low Pressure Vacuum Carburizing Heat Treatment Rapid heating. Rapid heating is 5 times the normal heating speed. It is mainly suitable for carbon steel and low alloy steel forgings. It can shorten the heating cycle, reduce heating oxidation loss, improve heating quality and reduce fuel consumption. Effects of Heat Treatments on Steels for Bearing Applications Induction heating. The use of induction heating furnaces is an important measure to save energy and reduce consumption in die forging workshops. It is mainly suitable for mass production of die forgings with little change in blank cross-sectional dimensions. Production Process Of Vacuum Brazed Diamond Saw Blade Compared with ordinary flame furnaces, the thermal efficiency of induction heating furnaces can be 50% to 60% higher. %, the oxidation burning loss is only 0.5%, and the production efficiency can be increased by 10% to 30%.Heat treatment process for wide and thick plates

评论

发表评论

此博客中的热门博文

Structural design of all-fiber trolley resistance furnace

 This paper focuses on the structural design of a full-fiber trolley-type resistance furnace. It uses high-aluminum full-fiber modules, CrMn resistance strips and fiber seals to replace the traditional brick kiln-type resistance furnace structure. It saves 30% of the overall power and is energy-saving, environmentally friendly, and convenient. Applicable, safe and reliable features. Research on vacuum brazing technology of dissimilar metals This trolley furnace is mainly used for tempering and welding annealing of large automobile forgings such as 45, 50, 55, 12Mn2VB, 40Cr, 42CrMo, 32MnSiVS5 and other steels. It is also used for low-temperature processing of carbon structural steel, alloy steel, mold steel and other products. Effect of filler metal on vacuum brazing of cemented carbide and steel In the tempering treatment, the parts are heated to the process temperature in the furnace and then insulated, and then come out of the furnace to be air-cooled to complete the
阅读全文

Trolley oven use

 It is an energy-saving oven for industrial large-scale production. It is mainly used for drying transformer cores and coils, drying spray-painted electrical cabinets and parts, drying rare earths, and drying casting sand molds. Heat treatment process for wide and thick plates drying, motor drying and other uses. The trolley-type material inlet and outlet method is adopted, which is suitable for automatic inlet and outlet of large quantities of workpieces. Effect of filler metal on vacuum brazing of cemented carbide and steel In the production process of Qianshi transformers, processes such as core preheating, coil pre-drying, coil dipping and drying, and resin curing are very critical and directly affect the quality of the transformer. Therefore, they have a negative impact on the temperature uniformity of the curing furnace and the reliability of the control system. The requirements are very high. Research on vacuum annealing of titanium alloys The YBDX series of tran
阅读全文