Box furnace adjustment operation

 First turn on the adjustment mode: (1) The material tray moves from the front chamber to the back chamber. Press the forward button F3 of the push device until the signal light 1 of the material hook hooked to the material tray lights up. Process Of Preventing Deformation And Cracking Of Mold By Vacuum Heat Treatment Then press the back button F4 of the push-pull device to pull out the material tray. ,until the material tray reaches the pulling position, the material hook is decoupled [decoupling light 2 lights up] Press F5 to open the middle door, vacuum-brazing-repair-method-for-cracks press F3 to push the material tray into the rear chamber, 4 lights up after being pushed into place, the material hook returns to 5, and the middle door When closed, the material hook returns to its original position and the action stops.Vacuum brazing of ceramic and metal materials (2) To move the material tray from the back room to the front room, first raise the lifting platform, press the F3 material hook to 11, open the middle door, stop the material hook to 4, and then press F3 to move the material hook to the 13 pan grabbing position. Press F4, move the material hook to 14, close the middle furnace door, lower the lifting platform to the oil tank, and return the material hook to its original position.Application example of vacuum heat treatment technology in mold